Quantcast
Channel: Submarine & Other Matters
Viewing all articles
Browse latest Browse all 2347

How Could Taiwan Build A Submarine? Teardrop Solution.

$
0
0
After years of diplomatic inactivity the US has decided to license to Taiwan several major aspects of  conventional (diesel-electric) submarine. The very low amount (maybe only around US$100 million) Taiwan has budgeted to design its future submarines is just one indicator that Taiwan is not aiming to build a major new design. Taiwan's determination to build an existing teardrop design is highlighted in the display of Taiwan's teardrop model (see photo below) very similar to Taiwan's existing Hai Lung class submarines.

To minimize existing Chinese pressure against Taiwan designing and building submarines (considered by China potent strategic weapons) Taiwan may build an existing teardrop design. Designs for which Taiwan, the US, Japan and the Netherlands already have plans. Taiwan already has two teardrop design Dutch built Hai Lung class submarines commissioned in 1987-88. The Hai Lungs are based on the Dutch Zwaardvis class which in turn are based on the US Barbelclass.

Japanese contractors might also assist Taiwan. This is noting Japan (inspired by the US Barbel class) developed and used the Uzushio class teardrop style submarines. See photo below of an Uzushio class on the surface.


The US's licensing decision (including new weapons, computers and sensors) can make an existing teardrop design a more formidable "modern" submarine.  Apparently "the [US] approvals cover a marketing license for a submarine combat management system, or CMS, along with a separate technical assistance agreement." 

A CMS typically covers the many hardware and software aspects of the submarine's weapons systems, sonar systems and photonics masts. It also covers the computerised command coordination between these systems to direct the weapons onto targets. The US has already licensed modern and potent submarine launched Harpoon missiles and Mark 48 torpedos to Taiwan. Anechoich tiles could also be applied to a teardrop hull.


The US could assist with its corporate records, including designs which went in building the Barbel class. Records would exist at the Pentagon, the US Navy run Portsmouth Naval Shipyard, in Kittery, Maine and at what was Ingalls Shipbuilding, Pascagoula, Mississippi (now Huntington Ingalls Industries).

Contractors once in Netherland's RH Marine might also assist. As in 2017 they were involved in overhauling Taiwan's Hai Lung class submarine electronics and integration of their platform and electromechanical systems. 


Taiwan's CSBC model of a teardrop hull style future submarine (above) displayed at the September 2016, Kaohsiung International Maritime and Defence Exhibition, arms exhibition, Taiwan. Notice this model's striking similarity with Taiwan's current teardrop hull style Hai Lung class, submarines (below).
---


Note how similar the photo of the model is to this cut away of  Taiwan's Hai Lung class submarines, commissioned in 1987-88 (Diagram courtesy Dutch Submarines . com)
---

BACKGROUND-COMMENTS

Even as fare back as 2016 Taiwan had advanced plans to develop its eight future submarines. Taiwan appears to be avoiding designing a totally new submarine on cost and Chinese pressure grounds. Instead Taiwan wants to utilize as many of the designs and components of its two existing Dutch built Hai Lung class submarines as possible.

From 15 to 18 September 2016, at Taiwan’s Kaohsiung International Maritime and Defence Exhibition, Taiwan was indicating it is getting more realistic about building 4 to 8 teardrop style submarines. Taiwan's Indigenous Defence Submarine Project is known as the "Qianlong Project".

Based on the Exhibition Media Release via MarketWired Taiwan’s China Shipbuilding Corporation (CSBC) created the Submarine Development [Design] Center of CSBC (SDCC)) in August 2016. The design contract, which is understood to be worth around US$95 million, is expected to be issued by the Taiwanese government before the end of 2016 and may run until 2019. 

Taiwan’s Ming Rong Yuan Business Co., LTD. ("one of the world's largest manufacturers of pressure vessels") has joined forces with various domestic research institutes to develop submarine pressure hulls. Ming Rong Yuan Business Co., LTD, at the Kaohsiung arms exhibition, exhibited a miniature model made of high strength low alloy (HSLA) pressure hull steel. HSLA-80 alloy steel has properties making it "easy to handle". HSLA-80 is actually produced by Taiwan's China Steel Corporation.


Japan's no longer used teardrop style Uzushio class submarine. While Uzushios no longer exist the original builders (Japan's MHI, KHI and Ministry of Defense) still have the design plans and could assist Taiwan to design and even construct a future teardrop submarine. (Photo courtesy seaforces(dot)org).
---

Pete

Viewing all articles
Browse latest Browse all 2347

Trending Articles